| Taper | Linear | Linear, Logarithmic, Antilogarithmic |
| Range of values | 1K Rn 1M | 100 Rn 5M |
| Standard tolerance | 30% (100 Rn 1M) | 20% (1K Rn 5M), 30% (100 Rn 1M) |
| Max. Voltage | 200 Vdc | 200 Vdc (Linear), 100 Vdc (Log, Alog) |
| Nominal power at 50C (122F) | 0.15 W | n/a |
| Nominal power at 70C (158F) | n/a | 0.33 W |
| Residual resistance | 0.5% Rn (5 min.) | 0.5% Rn (5 min.) |
| Equivalent noise resistance | 3% Rn (3 min.) | 3% Rn (3 min.) |
| Operating temperature | -40C to +85C (-13F to +158F) | -40C to +90C (-40F to +194F) |
| Mechanical rotation angle | 235 5 |
| Electrical rotation angle | 220 20 |
| Torque | 0.4 to 2 Ncm (0.6 to 2.7 in-oz) |
| Rotational Stop | > 5 Ncm (>7 in-oz) |
| Life cycles | Up to 10.000 | Up to 10.000 |
| Electrical life (test) | 1.000h at 50C; 0.15W (10% R) | 1.000h at 70C; 0.33W (5% R) |
| Mechanical life (test) | 1000 cycles at 10 to 15 cpm (10% R) | 1000 cycles at 10 to 15 cpm (3% R) |
| Temperature coefficient | n/a | 1.500 ppm/C (-40C; +90C), 1.000 ppm/C (-25C; +70C) |
| Thermal cycling (test) | 16h at 90C and 2h at -40C (5% R) | 16h at 90C and 2h at -40C (2.5% R) |
| Damp heat (test) | 500h at 40C and 95% RH (15% R) | 500h at 40C and 95% RH (5% R) |
| Vibration (test) | 2h each plane at 10Hz - 55Hz (3% R) | 2h each plane at 10Hz - 55Hz (2% R) |
| Storage (test) | 6 month at 23C 2C and 50% RH (5% R) | 6 month at 23C 2C and 50% RH (5% R) |
| Detents | Up to 16 mechanical detents | Up to 16 mechanical detents |
| Mounting method | Vertical adjust (V50, V60), Horizontal adjust (H40) | Vertical adjust (V50, V60) |
| Wiper position | Initial, 50%, Final (standard) | Initial, 50%, Final (standard) |
| Rotors | L (Screwdriver), M (Hexagonal), G (Hexagonal), K (Cross slot) | L (Screwdriver), M (Hexagonal), G (Hexagonal), K (Cross slot) |
